Products
Amorphous alloy strip
1. The iron base amorphous alloy strip
In pieces the iron base amorphous alloy strip material, strip width naming, naming format is as follows:
For example: FA - 010 and FA - 142 respectively width of 10 mm and 142 mm wide iron base amorphous alloy strip.
2. The performance characteristics
Mixer iron-based amorphous alloy is a new kind of soft magnetic alloy material, he is made up of metal elements of Fe and metalloid elements Si, B, special purpose also contains trace Cr, Ni, Co and other metal elements. Adopt international advanced rapid cooling fast quenching technology, the molten metal at 106 ℃ / s direct cooling, made the thickness of 25 ~ 30 m iron base amorphous alloy thin strip. This alloy strip has the atomic arrangement of short-range order, Great Wall disordered amorphous alloy organization structure, the organization structure has many unique properties, such as excellent soft magnetic properties, corrosion resistance, wear resistance, high hardness, high strength, high resistance rate, etc.
Mixer iron-based amorphous alloy strip has high saturation magnetic induction intensity, the high initial and maximum magnetic permeability, low coercive force, low loss (for silicon steel sheet commonly 1/3 ~ 1/5) and high temperature stability, low excitation power, can replace silicon steel sheet in many areas, permalloy and ferrite, widely applied in electronic components with high accuracy and stability requirements.
3. The application field
Pieces of different power distribution, electronic transformer, power frequency magnetic core
Mixer medium frequency power supply transformer core
In pieces CD type reactor core
Mixer ring without air-gap constant inductance filter core
Magnetic core of mixer PFC power factor correction
Mixer magnetic core of pulse transformer
Pieces of ac/dc transformer magnetic core
4. The iron base amorphous alloy basic performance
Typical physical properties of the mixer iron-based amorphous alloy
Mixer iron-based amorphous alloy typical magnetic after annealing
5. Iron base amorphous alloy strip specification